bare essentials are a lathe with a chuck

No woodturner ever has all the equipment they would really like.There are four things you need to become a woodturner: a workspace, the equipment, some timber and the necessary skills. Unseasoned timber is fun to turn. If you practice, you will improve.. Eventually, practice makes perfect. The skillA turner must be able to prepare the wood, sharpen and use the turning tools, and make pleasing shapes for the finished items. If you start with a cheap, flimsy machine, you will soon want to replace it. Practice some more. a sharpening jig for gouges. But lots of people do great work in just a garden shed or garage. It is a mistake to buy tropical hardwoods when you are starting out. 

The workspaceThe space you can dedicate to the craft determines what you can do. But don&39;t fall into the trap of thinking that buying the latest advertised tool will make you a turner. You will soon find you have more timber than you can use, and will need somewhere to store it, protected from the weather while it seasons. Scrapers and chisels can be sharpened using the grinders own tool rest. A good used machine is much better than a poor new one. With these, you can make bowls and vases, boxes, all kinds of spindles, and lots of mess. A hammer and splitting wedges can stand in for a bandsaw. Blunt tools will not give you the results you want. 

And, unless your workspace is very large, try to find somewhere else protected from the weather to store the wood. some basic turning tools - a good start would be a small roughing gouge, a small spindle gouge, a small bowl gouge, an 18mm skew chisel, a square nose scraper, a round nose scraper and a parting tool an instructional DVD or book a face shield and dust mask the usual workshop tools - screwdrivers, power drill, handsaw etc. The kitWhen you start, the bare essentials are a lathe with a chuck or at least a faceplate.To learn the craft, read the books and magazines, study the DVDs, take lessons, join a turning club. The materialsIn the beginning, you can buy readymade turning blanks, but this is the most expensive way to buy wood. Later, you will need a bandsaw, a chainsaw, a drill press, a dust extractor, power sanding equipment, additional turning tools, buffing equipment and lots more. They are beautiful, but hard to turn. 

They take up the space that you will need, and detract from the proper dignity of the craft. A proper building, secure, insulated, heated, powered, dry and well lit is ideal. a grinder for wholesaler Deep Groove Ball Bearings Manufacturers sharpening. Whatever you use, if possible, allow nothing in the workspace that does not relate to turning - no bicycles, lawnmowers etc. Woodturning can be noisy and dusty, and you need somewhere to store materials and valuable equipment, so the workspace is the first thing to sort out. The lathe should be the most substantial possible.For practice, almost any timber will do, but it is easier to turn wood that is free of large knots, decay and splits, and not too hard. Better to convert small logs and branches to turning blanks yourself, at no cost. Learn from people who have gone before, then go your own way to establish your own original style.